4 x 5 L can

Part.nr.: 34318

Emtor BL-5400 is a mineral, emulsifiable cutting fluid for machining ferrous and non-ferrous metals. Partly synthetic additives ensure that when mixed with water, Emtor BL-5400 forms a fine dispersion emulsion with high stability. Provided that Emtor BL-5400 is used in the correct manner, the product will achieve the following properties:

  • Free of: chlorine, nitrite, PCB, PCT, amines and boric acid
  • Extremely finely dispersed, highly stable emulsion
  • Good corrosion protection
  • Good 'Extreme Pressure' properties
  • Does not affect paint, provided that 2-component machine paints are used
  • Dermatalogically tested, effective protection against skin complaints.


Emtor BL-5400 can be used universally for machining a range of metals. It can be used to outstanding effect for turning, drilling, milling and grinding steel and aluminium alloys.

Storage: Protect against frost, heat and direct sunlight. Recommended temperature for storage and transport: 5 - 40°C.

Mixing ratio (refractometer factor 0.9):
Aluminium alloys and steel: from 1:20
Cast iron: from 1:16

Typical standard analyses

Density at 15 °C, kg/l 0,960
Viscosity 20 °C, mm²/s 160,00