EMTOR UN-5200
Available packagings
4 x 5 L can
Part.nr.: 34319
Emtor UN-5200 is a semi-synthetic, emulsifiable cutting fluid for the universal machining of metals. Special additives ensure that when mixed with water, Emtor UN-5200 forms a fine-dispersion, fluorescent emulsion that is highly stable. If the Emtor UN-5200 is used in the correct manner, the product will achieve the following properties:
- Chlorine, nitrite, PCB and PCT-free
- Extremely finely dispersed, highly stable emulsion
- Good corrosion protection
- 'Extreme Pressure' properties
- Does not affect paint, provided that 2-component machine paints are used
- Dermatalogically tested, effective protection against skin complaints
- Long emulsion service life possible, which requires minimal maintenance
Application
Emtor UN-5200 is ideally suited for turning, drilling, milling and grinding different types of metal such as: steel, cast iron, stainless steel, and copper and aluminium alloys.
Storage:
Protect against frost, heat and direct sunlight. Recommended temperature for storage and transport: 5 - 40°C.
Mixing ratio (refractometer factor 1.0):
Steel and non-ferrous metals: from 1:25
Cast iron and high-tensile steel: from 1:20
Aluminium alloys: 1:20
Typical standard analyses
| Density at 15 °C, kg/l | 0,970 |
|---|---|
| Viscosity 20 °C, mm²/s | 250,00 |
| Flash Point PM, °C | 120 |
| Refraction Index 20°C | 1,466 |