EMTOR BL-5400
Available packagings
4 x 5 L can
Part.nr.: 34318
Emtor BL-5400 is a mineral, emulsifiable cutting fluid for machining ferrous and non-ferrous metals. Partly synthetic additives ensure that when mixed with water, Emtor BL-5400 forms a fine dispersion emulsion with high stability. Provided that Emtor BL-5400 is used in the correct manner, the product will achieve the following properties:
- Free of: chlorine, nitrite, PCB, PCT, amines and boric acid
- Extremely finely dispersed, highly stable emulsion
- Good corrosion protection
- Good 'Extreme Pressure' properties
- Does not affect paint, provided that 2-component machine paints are used
- Dermatalogically tested, effective protection against skin complaints.
Application
Emtor BL-5400 can be used universally for machining a range of metals. It can be used to outstanding effect for turning, drilling, milling and grinding steel and aluminium alloys.
Storage: Protect against frost, heat and direct sunlight. Recommended temperature for storage and transport: 5 - 40°C.
Mixing ratio (refractometer factor 0.9):
Aluminium alloys and steel: from 1:20
Cast iron: from 1:16
Typical standard analyses
| Density at 15 °C, kg/l | 0,960 |
|---|---|
| Viscosity 20 °C, mm²/s | 160,00 |