RUNNING-IN MONOGRADE 30
1 x 60 L drum
Part.nr.: 35323
Running-In Monograde 30 is a special SAE 30 motor oil that has been specially developed for optimal and rapid running in of overhauled classic combustion engines and features the following properties:
- Ensures the correct and rapid running in of all moving parts in an overhauled engine
- Provides complete protection to the overhauled engine during the running-in process
- Ensures optimal sealing between the piston rings and cylinder wall once the overhaul is complete
- A well run-in engine will use a minimal amount of oil and will make the most economic use of fuel
Application
Running-In Monograde 30 is a mineral SAE 30 motor oil for optimal and rapid running-in of overhauled classic combustion engines. After overhauling, fill the engine with Running-In Monograde 30 and run the engine in for around 1000 km using a variety of driving styles and in a manner that achieves maximum torque. When driving, avoid maximum revs and maximum engine loads as far as possible. After the running-in period, replace the Running-In Monograde 30 with the recommended type of motor oil.
Product specifications
API SE/CC
Typical standard analyses
| Density at 15 °C, kg/l | 0,892 |
|---|---|
| Viscosity 40 °C, mm²/s | 103,00 |
| Viscosity 100 °C, mm²/s | 11,70 |
| Viscosity Index | 98 |
| Flash Point COC, °C | 230 |
| Pour Point, °C | -18 |
| Total Base Number, mgKOH/g | 3,5 |
| Sulphate Ash, % | 0,55 |