1 L tin Kroon-Oil Flushing Oil

Available packagings

6 x 1 L tin

Part.nr.: 34543

Flushing Oil is an effective single-grade, high quality flushing oil. The advantageous choice of viscosity, premium solvent-refined base oils and specially detergent and dispersion additives make Flushing Oil extremely effective. Thanks to the perfect formulation of these substances, the product provides the following properties:

  • High dispersion and detergency
  • Can also be used effectively used at low temperatures
  • High resistance to wear, corrosion and foaming
  • Significant resistance to oxidation
  • Can be easily and effectively mixed with both multigrade mineral and (fully) synthetic motor oils.
  • Has completely no effect on (old) gaskets and seals: no risk of leakage
  • Good moisture absorber and neutraliser


Flushing Oil is a flushing oil for petrol and diesel engines. It works effectively in the switch from a lower quality to improved quality product. It is also highly suitable if the motor oil contains a lot of condensed water, coolants, fuel dilution and/or white sludge.

Instructions for use:

  • Allow the engine to idle for 20-30 minutes (preferably when engine is warm)
  • Then drain off, replace the oil filter and fill the engine with Kroon-Oil (fully) synthetic motor oil.

Product specifications


Typical standard analyses

Density at 15 °C, kg/l 0,886
Viscosity -15 °C, mPa.s 5000
Viscosity 40 °C, mm²/s 68,00
Viscosity 100 °C, mm²/s 8,00
Viscosity Index 98
Flash Point COC, °C 215
Pour Point, °C -24
Total Base Number, mgKOH/g 3,5
Sulphate Ash, % 0,55