EMTOR BF-5200
Available packagings
4 x 5 L can
Part.nr.: 37394
Emtor BF-5200 is a high-quality water-miscible, boron-free, amine-containing EP metalworking fluid for the universal machining of a wide range of metals, including steel, cast iron, aluminium and stainless steel.
Emtor BF-5200 is particularly characterised by:
- Good anti-foaming behaviour
- Completely free of boric acid and biocide
- Strong flushing effect
- Extremely finely dispersed, highly stable emulsion
- Good corrosion protection
- Outstanding 'EP' properties
- Dermatologically tested, good protection against skin conditions
- Long-lasting emulsion stability ensuring minimal maintenance.
Application
Emtor BF-5200 is excellent for the turning, drilling and milling of steel, cast iron, stainless steel and aluminium. The concentration of the emulsion can be determined with a refractometer. The measured Brix value X refractometer factor = concentration in %.
Storage:
Protect against frost, heat and direct sunlight. Recommended temperature for storage and transport: 5 - 40°C.
Mixing ratio (refractometer factor 1.5)
Steel, cast iron and high-tensile steel: 8%
Aluminium alloys: 8%
Typical standard analyses
| Density at 15 °C, kg/l | 0,990 |
|---|---|
| Viscosity 20 °C, mm²/s | 114,00 |
| Flash Point PM, °C | 120 |