ARMADO SYNTH NF 10W-40
1 x 20 L can
Part.nr.: 35069
Armado Synth NF 10W-40 is an extremely modern synthetic diesel motor oil for use in commercial vehicles that is of an unprecedented level of quality. By using synthetic base oils combined with the latest additives technology, Armado Synth NF 10W-40 sets the new standard for motor oil used in commercial vehicles. The product achieves the following properties:
- Saves fuel and keeps oil consumption exceptionally low
- A smooth cold start, even at extremely low temperatures
- Provides a strong lubricant film, even under the most extreme operating conditions
- Excellent cleaning ability
- Prevents engine wear
- Copes exceptionally well with the long oil change intervals that are common today
- Also prevents bore polishing
Application
Armado Synth NF 10W-40 is suitable for modern diesel engines that are required to perform in the most severe operating conditions. Highly suitable for use in diesel engines with low exhaust gas emissions (including EURO 3, 4 and 5), in combination with diesel fuels with a low sulfur content. Armado Synth NF 10W-40 has been developed, in keeping with the manufacturers' instructions, to allow very long oil change intervals (100,000+ km) while retaining a very long and problem-free service life.
Product specifications
ACEA E4, E7
API CF
MAN M 3277
MB 228.5
Scania LDF-3
Mack EO-N
Renault VI RLD-2
Volvo VDS-3
Deutz DQC III-10
MTU Type 3
Scania LDF-2
DAF Extended Drain
Typical standard analyses
| Density at 15 °C, kg/l | 0,863 |
|---|---|
| Viscosity -25 °C, mPa.s | 5480 |
| Viscosity 40 °C, mm²/s | 85,60 |
| Viscosity 100 °C, mm²/s | 13,00 |
| Viscosity Index | 152 |
| Flash Point COC, °C | 228 |
| Pour Point, °C | -36 |
| Total Base Number, mgKOH/g | 15,9 |
| Sulphate Ash, % | 1,80 |