6 x 1 L tin 34542

Running-In Monograde 30 is a special SAE 30 motor oil that has been specially developed for optimal and rapid running in of overhauled classic combustion engines and features the following properties:

  • Ensures the correct and rapid running in of all moving parts in an overhauled engine
  • Provides complete protection to the overhauled engine during the running-in process
  • Ensures optimal sealing between the piston rings and cylinder wall once the overhaul is complete
  • A well run-in engine will use a minimal amount of oil and will make the most economic use of fuel


Running-In Monograde 30 is a mineral SAE 30 motor oil for optimal and rapid running-in of overhauled classic combustion engines. After overhauling, fill the engine with Running-In Monograde 30 and run the engine in for around 1000 km using a variety of driving styles and in a manner that achieves maximum torque. When driving, avoid maximum revs and maximum engine loads as far as possible. After the running-in period, replace the Running-In Monograde 30 with the recommended type of motor oil.

Product specifications


Typical standard analyses

Density at 15 °C, kg/l 0,892
Viscosity 40 °C, mm²/s 103,00
Viscosity 100 °C, mm²/s 11,70
Viscosity Index 98
Flash Point COC, °C 230
Pour Point, °C -18
Total Base Number, mgKOH/g 3,5
Sulphate Ash, % 0,55